BroadMax Technology LinkMAX HSA300 Manuel d'utilisateur télécharger pdf (Page 76)

LinkMAX



 HSA300 User Manual

Adding IP Routes

Follow these instructions to add an IP route to the routing table.

1. From the IP Route Table page, click

The IP Route – Add page displays, as shown in Figure 38.

Figure 38. IP Route – Add Page

2. Specify the destination, network mask, and gateway or next

hop for this route.

For a description of these fields, refer to the table on page 77.

To create a route that defines the default gateway for your LAN,

enter 0.0.0.0 in both the Destination and Net Mask fields. Enter

your ISP’s IP address in the Gateway/NextHop field.

Note that you cannot specify the interface name, route type or

route origin. These parameters are used only for routes that are

identified automatically as the device communicates with other

routing devices. For routes you create, the routing table

displays system default values in these fields.

3. Click

4. On the confirmation page, click

to return to the IP

Route table page.

The IP Routing Table will now display the new route.

5. Click the Admin tab, and then click

Commit & Reboot

in the

task bar.

6. Click

to save your changes to permanent

memory.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 143 144

Pas de commentaire

BroadMax Technology LinkMAX HSA300 Manuel d'utilisateur Page 76